email: info@nutechpolymer.com
 |
 |
| 1. Inspect and position the joint then grease with high temperature grease | 2. Remove the grease fitting and install the proper adapter. |
 |
 |
| 3. Attach the tool and heat the barrel. | 4. When the temperature stick melts, the polymer is molten. |
 |
 |
| 5. Inject the molten polymer with air pressure. | 6. Drill a grease passageway through the newly created bushing and install grease fitting. |
| Main | Comments | FAQs | Process | Get Info | |
| email: info@nutechpolymer.com | |
 |
Truk-Align,
Inc. 1620 N. McMullen Booth Rd Clearwater, Florida 33759 1-800-456-8411 |